Solar PV Balance Of System

Our NEX Clean solar panel cleaning solution is designed to make panel maintenance effortless. This adjustable unit fits most panels in the market and ensures optimal, uniform cleaning with its well-aligned micro-sprinklers. Say goodbye to uneven cleaning patterns and keep panels in top condition...

Rubicon Tinned copper lugs are a popular choice for terminating the end of electrical cable due to their high conductivity and low resistance properties. With a size of 25 x 8mm, these lugs are suitable for a wide range of cable sizes. The Rubicon...

The Reiku Connector straight, male, polyamid, black, M50, NW 48mm is a type of connector designed to provide a secure and reliable connection for cables and wires. It features a straight male end, with a polyamide construction that is both durable and resistant to...

The Enphase Q Cable™ and accessories are part of the sixth generation Enphase IQ System™. These products provide simplicity, reliability, and faster installation times. Two-wire, double-insulated Enphase Q Cable is 50% lighter than the previous generation Enphase cable Four-wire (three-phase) option also available New...

Reiku Conduit support bracket The Reiku Conduit support bracket with a nominal width (NW) of 23mm is designed to install Reiku conduits on housings, rails, or similar structures. The bracket is part of the Reiku System Supports family, which is made of high-grade Polyamide...

Whenever working with electrical currents, safety is always a top priority. Enphase Q-SEAl-10 manufactured with this in mind. By sealing each of the unused connectors with the Female Sealing Cap on the IQ Series Q-Cables. It will eradicate the risk of electrical shock when...

Surfix is suitable for direct installation without further protection in walls, in roofs and suspended floors in houses, offices and buildings. It’s neat appearance allows for surface installation. Manufactured to SABS 1507, it is approved by municipalities and other major utility companies and is...

The Rubicon Tinned Copper Lug you mentioned has a size of 16 x 8mm, which is suitable for terminating electrical cables of a certain size. Tinned copper lugs are typically used because they are resistant to corrosion, which can negatively impact electrical connections over...

The Lapp GMP-GL-M counter nut is a black M25 x 1.5 glass fiber-reinforced nut designed for maximum mechanical stability. Like other SKINTOP® counter nuts, it features a supporting surface for the spanner to prevent scratches on the housing. This is an important feature for...

The Reiku Tube Clamp is designed to securely fasten conduits made of galvanized steel with a nominal width (NW) of 10mm. The clamp features an elastomer profile made of ethylene propylene diene monomer (EPDM), which provides a high degree of elasticity, durability, and resistance...

The ARaymond Cable Routing Clips are designed to secure cables neatly along module edges or structural supports. These clips provide a reliable, organised solution for routing cables, reducing the risk of improper connections and protecting cables from damage. Key Benefits: Secure Cable Management: Holds...

The Staubli PV-ADS4-EVO 2A/6 is a high-performance panel receptacle (male) from the renowned MC4-Evo 2 series, designed for demanding photovoltaic applications. Engineered for durability, compatibility, and optimal power transfer, it supports cross-sections of 4 mm² and 6 mm² conductors, ensuring reliable and safe connections...

The Schneider Miniature Circuit Breaker (MCB), C-curve, 3-pole, 16A, is engineered to provide reliable protection against overloads and short circuits in residential, commercial, and light industrial installations. Featuring a C-curve tripping characteristic, it is ideal for general-purpose circuits with moderate inrush currents. Key Features...

The Zjbeny 4-Pole DC Circuit Breaker is engineered for high-voltage DC systems up to 1200 V, with a rated current of 20 A. Designed for secure protection and isolation in photovoltaic and other DC installations, it features a compact DIN rail mounting system for...

The Reiku Tube Clamp with rubber profile is designed for securely fastening conduits made of galvanized steel with a nominal width (NW) of 17mm. The clamp features an elastomer profile made of ethylene propylene diene monomer (EPDM), which provides a high degree of elasticity,...

The CT Hub is the main component of the Smappee Infinity monitoring system. You can connect up to 4 Current Transformers (CTs) or Rogowski coils to a CT Hub to measure different currents, ranging from 50 A to 1000 A. This allows for accurate submetering of...

Vectis provides a new highly pre-assembled PV mounting systems, such as this Aluminium ground mounting system. The pre-assembly of the main support beam makes installation more convenient, requiring less labour time. The system requires few components, which are all of high quality – saving...

The Schletter Screw is a hexagonal screw with a DIN 933 standard and a size of M10 x 25. This type of screw is commonly used in construction and engineering applications, and is designed to provide a secure and reliable connection. The hexagonal head...

The Vectis Groundmount Rail Splice is an essential component of the Vectis Aluminium Ground Mounting System, designed for efficient and secure solar panel installations. Featuring a pre-assembled structure with a main support beam, it streamlines installation and minimises labour time. Engineered for stability on...

The Schneider Mini Circuit Breaker (MCB) with a C-curve trip characteristic provides reliable overcurrent protection for residential, commercial, and light industrial electrical installations. Designed for quick and safe circuit isolation, this 1-pole, 16A breaker is ideal for protecting wiring and equipment against short circuits...