BC All
Filter
702 results
20
- 10
- 15
- 20
- 25
- 30
- 50
Featured
- Featured
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Sort
Sort by:
- Featured
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
-
Bussmann Solar fuse, gPV, 1000VDC, 6A, 10 x 38mmVendor: BussmannSKU: PV-6A10FThe Bussmann Solar fuse, designed specifically for photovoltaic (PV) systems, epitomises safety and reliability in solar energy installations. With its robust construction and high-performance specifications, this fuse is engineered to safeguard your PV systems against overcurrent conditions and ensure optimal operation even in demanding...
-
Bussmann Solar fuse, gPV, 1000VDC, 10A, 10 x 38mmVendor: BussmannSKU: PV-10A10FThe Bussmann Solar Fuse, model gPV, is a high-performance photovoltaic fuse specifically designed to protect solar power systems. Rated at 1000VDC and 10A, this fuse ensures reliable overcurrent protection for your solar panels and associated circuitry, preventing damage and enhancing the safety and longevity...
-
Citel DS240S-230/G SPD, compact, type 2, 1-phase, 20kAVendor: CitelSKU: 311731The DS240 Type 2 surge protectors are compact devices designed to protect single phase networks at the main switchboard. They provide a common or common/differential mode protection. This SPD is based on high energy varistor equipped with thermal disconnectors and failure indicator to comply...
-
Citel DS132RS-230/G SPD, type 1+2, AC, 230VACVendor: CitelSKU: 571532The DS130R is an extreme duty Type 1+2 designed to protect the entrance of the electrical installation. The DS130R is a one-pole SPD and can be used in common mode or common and differential mode. DS130R AC surge protectors are designed to be connected...
-
Citel DS44-280/G SPD, multipolar, type 2, 3P+N, 20kAVendor: CitelSKU: 461112The Citel DS44-280/G SPD (Surge Protective Device) is a robust multipolar device designed to protect electrical installations from transient overvoltages. Specifically classified as type 2 according to international standards, it ensures reliable protection against indirect lightning strikes and switching transients. With a maximum discharge...
-
Goodwe Current transformer, 16mm, 5m cable, 90A:90mAVendor: GoodweSKU: CT-90-5MThe GoodWe Current Transformer is designed for accurate measurement and monitoring of electrical currents in photovoltaic systems. With its compact and durable construction, this transformer ensures reliable performance and precision in current measurement. It is an essential component for integrating with GoodWe inverters to...
-
Enphase Disconnect tool for Q cable connectorsVendor: EnphaseSKU: Q-DISC-10The Enphase Disconnect Tool is a useful tool for disconnecting cable terminations quickly and easily. Its primary use is to disconnect Q cable connectors, but it can also be used to disconnect EN/MC4 connectors. This tool is especially useful for solar energy installations, where...
-
Enphase Field-wireable connector female, 1- phase cableVendor: EnphaseSKU: Q-CONN-R-10FThe Enphase Q Field-wireable Connector Female is a single-phase cable accessory that is designed to work with the Enphase Q Cable. This connector is a female field-wireable open connector that can be easily connected to Q cables on the roof without complex wiring. This...
-
Enphase Q cable, landscape(60-cell), 3-phase, 250VAC, 2mVendor: EnphaseSKU: Q-25-17-3P-160The Enphase Q Cable™ and accessories are part of the sixth generation Enphase IQ System™. These products provide simplicity, reliability, and faster installation times. Two-wire, double-insulated Enphase Q Cable is 50% lighter than the previous generation Enphase cable Four-wire (three-phase) option also available New...
-
Enphase Q Cable sealing cap for unused connector, femaleVendor: EnphaseSKU: Q-SEAL-10Whenever working with electrical currents, safety is always a top priority. Enphase Q-SEAl-10 manufactured with this in mind. By sealing each of the unused connectors with the Female Sealing Cap on the IQ Series Q-Cables. It will eradicate the risk of electrical shock when...
-
Enphase Terminator cap for unused 1-phase cable endsVendor: EnphaseSKU: Q-TERM-R-10The Enphase Terminator Cap, also known as the Q-TERM-R-10, is a device used to seal off unused open ends of a single-phase Q-Cable run. This is important for a number of reasons, including ensuring the safety of the system and preventing moisture or debris...
-
Enphase Field-wireable connector male, 1- phase cableVendor: EnphaseSKU: Q-CONN-R-10MThe Enphase Q-CONN-R-10M is a male field-wireable open connector that is designed to be compatible with the Enphase Q Cable. This connector is designed to provide greater flexibility during on-site installations, while also reducing cable waste. With the Q-CONN-R-10M, it is easy to connect...
-
Enphase Q cable, Portrait, 3-phase, 250VAC, 1.3mVendor: EnphaseSKU: Q-25-10-3P-200The Enphase Q Cable™ and accessories are part of the sixth generation Enphase IQ System™. These products provide simplicity, reliability, and faster installation times. Two-wire, double-insulated Enphase Q Cable is 50% lighter than the previous generation Enphase cable Four-wire (three-phase) option also available New...
-
Enphase Radius power line filter, PLC coupling, 3-phase, 250AVendor: EnphaseSKU: LCF-250-PCIn commercial applications, the LCF-250-PC Line Filter, manufactured by Radius Power, separates power line communication domains across the Enphase Microinverter™ installation when multiple Enphase Envoys™ are located on a single utility transformer or when site loads generate electrical noise that disrupt communications. The integrated...
-
Enphase Q cable, landscape(60-cell), 1-phase, 250VAC, 2mVendor: EnphaseSKU: Q-25-17-240The Enphase Q Cable that you have mentioned is specifically designed for use with 60-cell solar panels in a 1-phase configuration, with a voltage rating of 250VAC and a length of 2m. This cable is part of the sixth generation Enphase IQ System, which...
-
Enphase Terminator cap for unused 3-phase cable endsVendor: EnphaseSKU: Q-TERM-3P-10The Q-TERM-3P-10 is an end-terminating device, used to seal off the unused open end of a single phase Q-CABLE run. Most Enphase systems will require at least 1. It is not recommended to open the Terminator cap after is has been sealed as this...
-
Enphase Q Raw cable, no connectors, 300m cable, 3-phaseVendor: EnphaseSKU: Q-25-RAW-3P-300The IQ Cable Q-25-RAW-3P-300 is a high-quality, versatile cable designed for various electrical and industrial applications. With a continuous length of 300 metres, this cable provides extensive reach and flexibility, making it ideal for large-scale projects or installations that require long runs without interruptions....
-
Enphase 100A CT for Envoy S Metered + DRMVendor: EnphaseSKU: CT-100-SPLITThe Enphase 100A CT for Envoy S Metered + DRM is a device that allows for the monitoring of home energy consumption when used with an Envoy-S Metered or IQ Envoy. The device is specifically designed to measure the current flowing through a home's...
-
Enphase Q Raw cable, no connectors, 300m cable, 1-phaseVendor: EnphaseSKU: Q-25-RAW-300The Enphase Q Raw Cable is a 1-phase, 2-wire cable that is sold without connectors and is available in a length of 300m. This cable is designed to be used with Enphase microinverters and other Enphase components, allowing for a reliable and efficient solar...
-
Rubicon Flat twin and earth, 2core x 10mmVendor: RubiconSKU: CABLE-TWIN-E10MMThe Rubicon Flat Twin and Earth cable, featuring 2 cores each with a 10mm² cross-sectional area, is a high-quality, reliable wiring solution designed for a wide range of electrical installations. This durable and versatile cable is ideal for both domestic and commercial applications, providing...